Report Error – Items not Fully Specified

    • January 4, 2019 at 10:02 am #222505
      Jill Kydd

      Hi All:

      First post from a newbie! I am using V11.11.3.1. I want to print a cabinet list, but when I select the reports icon I get an error message that says ” Some items are not fully specified. Complete their configuration in Features and Options”

      I found the Features and Options Catalogue…but How do I know which items 20 20 is taking about. In this design I am using only cabinets from my chosen manufacturer – there are none from other manufacturers.

      Thank you and appreciate your time!


    • January 4, 2019 at 10:20 am #222570
      Neil Wilson

      Hi Jill,

      The items causing the message are probably something placed by a wizard like toe kicks or soffits.  You can find what they are by right clicking on the work area and selecting show item list.  In the item list you can see which catalogs are associated with which items.

      Remove those items and replace them with stuff from Sample_E or _F and you should be good to go.


    • January 4, 2019 at 2:02 pm #222654
      Jill Kydd

      Hi Neil:

      That was it…Thank you so much!


You must be logged in to reply to this topic.

Share this Post